Cheap Price 10X10 Gauge Hot Dipped Galvanized Welded Wire Mesh

Welded wire mesh

Welded wire mesh is created with two orthogonal wires that are joined collectively at their intersections employing a resistance welding process to kind a grid. The line wires of the grid are guided via the welder making use of a sample board. The device drops cross wires into place and fuses them jointly to create the two exclusive planes that kind welded wire mesh.

Line wires (also referred to as long wires) are laid out on a pattern board to set the panel width spacing. Cross wires are fed into a hopper, and are programmed to be dropped one at a time onto the line wires. Then, the cross wires are resistance welded into spot setting the panel duration spacing. The panel improvements following the weld and the method starts off more than again.

Welded Wire Spacing
Welded wire mesh spacing can be expressed by measuring from the centre of two wires (Center to Heart) or by measuring the opening among two wires (Distinct Opening). We can manufacture normal and custom made welded wire mesh with a sq. mesh spacing range from one" to as huge as could be required.  Rectangular mesh spacing ranges from 1/2″ x up to as long as may possibly be required.

Edge Conditions
 Welded Wire Mesh has two regular edge situations: trimmed and untrimmed.

Detail specification:
Materials: low carbon metal wire, galvanized wire ,stainless steel wire
Area working : black welded wire mesh,
electro galvanized before welded wire mesh,
Electro galvanized after welded wire mesh
hot-dipped galvanized prior to welded wire mesh
Very hot-dipped galvanized soon after welding wire mesh
PVC-coated welded wire mesh
Power coated welded wire mesh
Wire diameter: .45mm to twelve.0mm
Gap size: 1/3" to one hundred fifty mm gap
Gap condition: sq. hole, rectangular hole
Width: .3M to 2.0M
Packing : in roll or in panel

remember to notice, we can weave speical wire diameter welded wire mesh this kind of as 1/four"X1.1mm, 1/two"X1.4mm and so on on your requirement 

Welded wire mesh Specification:

Open in inch Opening in (mm) Wire diameter
1/4" x one/four"
six.4mm x six.4mm
three/8" x three/8"
ten.6mm x ten.6mm
1/2" x 1/2"
twelve.7mm x twelve.7mm
5/eight" x 5/eight"
16mm x 16mm
three/4" x three/4"
19.1mm x 19.1mm
1" x 1/2"
25.4mm x 12.7mm
twenty five.4mmX25.4mm
one-1/2" x 1-one/two"
38mm x 38mm
1" x two"
25.4mm x 50.8mm
two" x two"
fifty.8mm x fifty.8mm
2" x 3"
50mm x 75mm
three" x three"
75mm x 75mm
two" x 4"
50mm x 100mm
two.11mm,two.5mm, three.0mm, 4.0mm
four" x 4"
100mm x 100mm
2.0mm,2.5mm, 3.0mm, four.0mm
CZPT Note:
one,CZPT roll duration:twenty- 30mwidth: .5m to one.8m
two,Particular measurements CZPT at ask for
3,Packing: in water-proof paper in rolls. CZPT packing CZPT at ask for.


Cheap Price 10X10 Gauge Hot Dipped Galvanized Welded Wire Mesh